Jacuzzi® (Legacy) J-400™ Series ProPolish™ Filter Bag

Subtotal
$28.14

Or

Product Details

Product Details

The genuine Jacuzzi® ProPolish™ Filter Bag is compatible with older J-400™ hot tub models. It shipped with 2006-2012 J-460, J-465, J-470 and J-480 models

 

  • Performance and fit qualified to Jacuzzi® factory standards
  • 5" Design which allows for installation of the secondary filter underneath
  • Use of non Jacuzzi® branded parts can adversely affect the quality of your spa experience. Damage to the hot tub due to unauthorized parts and accessories may void the warranty   

 

COMPATABILITY: The 2540-389 ProPolish™ filter bag was OEM standard on legacy J-400™ Collection Models. 2009-2012 J-480, J-470 and J-465 models (works alongside the 2540-387J filter, sold separately); 2006-2008 J-480, J-470 and J-465 models (works alongside the 2540-383J filter, sold separately, and the 2006-2008 J-480, J-470 and J-465 models (works alongside the 2540-383J, sold separately). If you have a J-415, J-425, J-435, J-445, J-475, J-485 or J-495, these filters are not compatible with your hot tub.   

Filter FAQ's

Replacing your hot tub filters is an important part of routine maintenance and is a critical step in keeping your water clear. As the leading brand name in the hot tub industry, Jacuzzi has qualified the best suppliers to manufacture our filter cartridges to our strict specification, both for filter performance and for fit within your hot tub’s filter area. Genuine Jacuzzi® Filters are available from your authorized Jacuzzi® retailer who can assist you with any other water care related questions.

 

Use of non-Jacuzzi® branded parts can adversely affect the quality of your spa experience. Damage to the hot tub due to unauthorized parts and accessories may void the warranty.  

Over time, you will notice that your hot tub filters discolor and begin to look dirty. This is because they are capturing all the oils and impurities in your hot tub water. Jacuzzi® Hot Tubs primarily use two styles of filters, depending on your hot tub model.

 

Pleated cartridge filters, which are used in all models are made of a durable folded paper like material. This type of filter can be soaked in a filter cleaning solution and rinsed with a garden hose to keep clean. It is recommended to clean your pleated cartridge filters frequently and replace them about every 12-18 months as needed. Having a second set of pleated filters to rotate into your spa allows you to clean your filters without draining the spa. It is not recommended to run the spa without the filters installed, as particles can enter your equipment and plumbing.

 

The second style of filter, which you will find in Jacuzzi® J-500™, J-400™ and J-LX™ collection models is a small dense microfiber filter that looks a bit like a top hat. It is installed within the canister that attaches to the smaller pleated cartridge filter. This is a disposable filter, and it cannot be rinsed clean. The water that reaches this filter in your hot tub has already passed through the pleated filter and no longer contains larger particles. Because of the fine fibers, spraying this with water from your hose will only load the filter with the metals and mineral particles that are common in tap water. This filter should be replaced every 3-4 months to maximize your hot tub’s filtration system.